WENZHOU JHENTEN MACHINERY CO.,LTD.
Mixing and emulsification double head type Mixing and emulsification one head type Emulsification tank Mixing and emulsification double head type
The Emulsification Tank adopts Vertical circular tanks, both of top and bottom are standard oval and torispherical head. Transition section in tank using circular arc transition, without dead corner, easy to clean. Heating mode with steam, electric heating, heat conduction oil, equipped with mechanical stirring according to customers’ requirement.
Tank Optional Configuration
The Crystallizing Tank can select 0.2μm hydrophobic sterile air filter, thermometer(Digital display or Dial type), 2 sight glasses, steam sterilization hole, sanitary manhole, liquid in-outlet, CIP rotating cleaning ball, liquidometer and Liquid level control system(Bearing module, non-contact ultrasonic, static pressure transmitting device) and so on, also can configure as customers’ requirement.
• Suitable for cosmetic, medicine, food, chemical, dyeing, printing ink and other industrial production, especially for high matrix viscosity, solid material content higher material preparation emulsion will be more efficacy.
• Volume:600L~20000L and multiple specification, also can design and manufacture according to customers’ requirement.
• Jacket can pass steam (or hot water), can also pass the cooling water. Jacket has disk tubular, full jacketed and Maitreya plate. Jacketed outside covered with insulation, thermal insulation material for rock wool (warm) or PU (cold).
• The connection adopts Tri-clamp, the tanks’ inner use 304 or 316L. The inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can polishing, wire drawing and sandblasting according to customers’ requirement.
• Agitation adopts top mechanical agitation. Stirring methods(Push type, screw, anchor, etc) can be selected.
• The sealing of agitating shaft and emulsification shaft adopt sanitary mechanical seal. The mixing motor can use Cycloidal reducer, stepless speed reducer. These items can be selected according to customers’ requirement. (Frequency control is widely used) Emulsion motor adopts frequency control of motor speed reducer
|Design temperature||According to the customers' requirements（0℃～160℃）|
Normal Model And Main Technical Parameters
|Motor power ：KW||4||7.5||7.5||11||11||15|
|Emulsification RPM||4P（The design can be adjusted according to customer usage）|
|Mixing RPM：r/min||22（The design can be adjusted according to customer usage）|
|4P（The design can be adjusted according to customer usage）|
|22（The design can be adjusted according to customer usage）|
|The above-mentioned data is the standard mixing and emulsification double head type emulsification tank,, for reference only. it can customize according to customer's requirements.|
No.808 Haitong Road, Binhai Development Zone,Wenzhou Economic and Technological Development Zone,Zhejiang,China