ZHEJIANG JHENTEN MACHINERY CO.,LTD.
JTRPG Mixing Tank be designed, manufactured and inspected in accordance with the pressure vessel standard(ASME Section VIII) and the steel welded atmospheric pressure vessel standard(NB/T 47003.1-2009) , strictly meet to GMP certificate requirements.
The Mixing Tank adopts Vertical circular tanks, both of top and bottom are standard oval and torispherical head. Transition section in tank using circular arc transition, without dead corner, easy to clean. Single layer, double layer(insulation for tank and bottom head) or Jacket(tank and bottom head have jacket and insulation), equipped with mechanical stirring according to customers’ requirement.
Tank Optional Configuration
The body of Mixing Tank can configure aseptic air filter, thermometer(Digital display or Dial type), PH meter, pressure gauge, steam sterilization hole, sight glasses, sanitary manhole, liquid in-outlet, CIP cleaning ball, liquidometer and Liquid level control system(Bearing module, non-contact ultrasonic, static pressure transmitting device) and so on, also can configure as customers’ requirement.
• Can be used as Storage Tank, mixing tank, temporary Storage Tank, mixing tank, etc., Used in liquid materials’ mixing and storage such as medicine, food, fruit juice beverage, dairy products, seasoning, brewing, beer, pharmaceutical, chemical and biological engineering.
• Volume:100L~5000L and multiple specification, also can design and manufacture according to customers’ requirement.
• Jacket can pass steam (or hot water), can also pass the cooling water. Jacket has full jacketed、half-pipe coil jacketed, dimple jacketed and plate coils. Jacketed outside covered with insulation, thermal insulation material for rock wool (warm) or PU (cold).
• The connection adopt Tri-clamp, the tanks’ inner layer use 304 or 316L. The inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can polishing, wire drawing and sand blasting according to customers’ requirement.
• According to the requirements of production and processing, can design with low heating, cooling, high-speed mixing system, sealing pressure system, vacuum system, measuring system and so on.
• According to different mixing materials and requirements to the mixing effect of the structure of impeller can adjust the turbine type design, paddle, anchor type, frame type, screw conveyor and so on..
According to customers’ requirement（0℃～160℃）
Normal Model And Main Technical Parameters
|RPM：r/min||36～53（倾叶开启涡轮式）（The design can be adjusted according to customer use condition）|
|The above-mentioned data is the standard, for reference only. It can customize according to customer's requirements.|
No.808 Haitong Road, Binhai Development Zone,Wenzhou Economic and Technological Development Zone,Zhejiang,China