Categories Products Center

Contact us

ZHEJIANG JHENTEN MACHINERY CO.,LTD.
Tel:+86-577-86867777
Fax:+86-577-86810195
E-mail:info@jhenten.com

SJM Falling film evaporation concentrator

SJM Falling film evaporation concentrator

    Heaters, separators, condensers, preheaters, vacuum systems, heat pumps, electrical meters, control cabinets, etc. 304 or 316L is determined according to the material process requirements.

Dimensions


Equipment composition

Heaters, separators, condensers, preheaters, vacuum systems, heat pumps, electrical meters, control cabinets, etc. 304 or 316L is determined according to the material process requirements.

Features
1. The material has a short residence time in the heating tube, which is especially suitable for the concentration of heat sensitive materials, and can be continuously fed and continuously discharged.
2. The evaporation temperature is low, and the efficiency and evaporation temperature can be selected according to customer requirements.
3. Heating the evaporator top spray film device is unique, and the film formation is uniform.
4. The condenser has a unique structure, a large heat transfer coefficient and good effect.
5. The injection heat pump is adopted, and the energy saving effect is obvious.

6. According to customer requirements, both automatic control and manual control can be adopted.


Technical parameters

Model SJM1-600 SJM1-800 SJM1-1000 SJM1-1200 SJM1-1600
Moisture evaporation(kg/h) 600 800 1000 1200 1600
Current density% 11.5~12
Discharge density% 45~48
Steam pressure(MPa) 0.3
Evaporation energy(kg/h) 420 560 700 840 1100
Evaporation temperature(℃) 60 Design lower evaporation temperature according to customer requirements
Heating temperature(℃) 70
Sterilization temperature(℃) 84~94
Water cost(t/h) 30 40 45 55 75
Equipment size(L x W x H)(m) 3.9x2.3x6.5 3.9x2.3x7 3.9x2.4x7.5 3.9x2.4x8 3.9x2.4x8.5

Contact us