Categories Products Center

Contact us

ZHEJIANG JHENTEN MACHINERY CO.,LTD.
Tel:+86-577-86867777
Fax:+86-577-86810195
E-mail:info@jhenten.com

JTRHJ Wine Fermentation Tank

JTRHJ Wine Fermentation Tank

    Red wine fermentation tank strictly follow the pressure vessel (ASME Section VIII) and "steel welding atmospheric vessel" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance..

Product Options

Tank design pressure:
Jacket design pressure:
Liner:
Insulation:
In-outlet:
Finish type:
Polishing precision:
Structure:

Dimensions

Red wine fermentation tank strictly follow the pressure vessel (ASME Section VIII) and "steel welding atmospheric vessel" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance..

Red wine Fermentation Tank use vertical circular tank body,the top is standard conical head,and top of tank body is equipped with dimple jacket ,can pumped in the cooling medium for circulating cooling; The lower of tank set mesh , filtering effect is better; the bottom is 60 ° ~ 90 ° inclination of conical head .It is not only good for wine liquid to bi-directional flow fast fermentation, but also is conducive to discharge yeast and impurity; At the bottom of the tank set mixing slag agitator used in the fermentation process and discharge process.

 

Tank Optional Configuration

Wine Fermentation Tank optional configuration: thermometer (digital display type or dial), sanitary manhole, in-outlet, sterile sampling valve, drain valve, level gauge, and liquid level self-control system (bearing module, non-contact ultrasonic, static pressure transmitting device), etc., or configured according to customers’ requirements.


Application
• Suitable for wine fermentation .

 

Feature
• 10m3, 19m3,25m3 variety volume of specifications, it can be designed, customized according to the customers' requirements.
• Jacket can put into chilled water (or cooling water), jacket is use dimple jacket; Jacketed outside covered with insulation layer, insulation material is PU (keep cold).
• Connector use tri-clamp, inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm~0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.

Design Parameter

Design temperature

Normal temperature (tank body)
0℃~7℃(jacket)

 

Material

Jacket

304

Insulation

PU(keep cool)

Feet

304

 

Normal Model And Main Technical Parameters

Parameters

Model

JTRHJ—10

JTRHJ—19

JTRHJ—25

Effective volume:m3

10

19

25

Barrel

Diameter:mm

Φ2100

Φ2400

Φ2500

Height:mm

2438

3657

4876

Bottom cone type

60° cone

Mixing

Motor power:kW

5.5

7.5

7.5

Mixing work RPM:r/min

60(mixing, slagging integrated type)(The design can be adjusted according to customers’ usage)

The above-mentioned data is the standard ,for reference only. it can customize according to customer's requirements.

Contact us